There is a clinical term called Upper Crossing Syndrome (UCS), and its main manifestation is the normal curvature of the cervical spine becomes straight or reduced; shrugging, increased thoracic spine curvature; postural changes such as round shoulders and hunchback. Severe cases will be accompanied by varying degrees of dizziness, numbness, neck and shoulder pain. For this, you can go to the hospital, the doctor will use muscle massage, combined with low-frequency pulse electrical stimulation therapy for rehabilitation training.
The electric neck massager device is served as a health care device for auxiliary massage, through two ways: muscle massage and hot compress. It can effectively relieve neck pressure, improve neck blood circulation, reduce lactic acid accumulation, and relieve neck muscle spasm and soreness. There are two types of electric neck massager functions, namely pulse current type and physical massage type.
Ⅱ. What are the types of electric neck massagers?
Pulse current is to simulate artificial massage by controlling the changes in frequency and band of low-frequency pulse current (below 1000Hz), which is harmless to the human body and can stimulate muscle contraction and relieve muscle spasm.
1. Recommended product: tahath USB rechargeable hot compress neck shoulder massager.
Using micro-electric pulse technology to deeply stimulate rigid muscles, mini smart electric neck massager with heating function, 5 modes and 15 levels of different intensity, is an intimate massager to relieve fatigue.
Physical massage is to massage the trapezius muscles on both sides of the neck through the massage contact combined with the kneading technique of the meridian of traditional Chinese medicine, so as to relax the muscles and reduce the problems of lactic acid accumulation.
2. Recommended product: TAHATH electric wireless smart shoulder and neck massager
Is It Useful to Use Electric Neck Massager Device Frequently?
As one of the five conventional non-destructive testing methods, eddy current testing is widely used in the steel industry, including metal bars, wire inspection, fatigue crack detection of structural parts, identification of material composition and impurity content, identification of heat treatment status, mixing and sorting, Measuring the thickness of the metal sheet and many other aspects. In recent years, with the deep understanding of eddy current testing technology and the development of computer, instrumentation and digital signal processing technology, eddy current non-destructive testing technology has made some breakthroughs in the application of the steel industry, for some of the past is considered the detection limit or " The impossible problem, found a solution or idea. For example, some people have proposed on-line detection of surface defects of high-temperature continuous casting slabs above 1100 °C, which has increased the temperature of traditional eddy current testing objects by several hundred Baidu, and a Swedish company has developed high-temperature steel and other metal sheets for testing 1000 °C. Eddy current testing equipment for billets. In addition, the application of eddy current testing extends to stainless steel capillary tubes, wire materials with a diameter of less than 1 mm, and mold liquid level detection.
Detection of Surface Defects of 1000 °C High-Temperature Continuous Casting Slab
The limitation of eddy current testing for high-temperature products lies mainly in the temperature that the probe can withstand. The traditional eddy current testing technology can detect temperatures up to 550 ° C under high-temperature conditions. If water-cooled probes are used, the temperature can be increased. Jia Huiming and other high-temperature eddy current probes developed by special materials, by means of air-cooling and water-cooling, the internal temperature of the sensor is always kept below 40 °C and can withstand strong high-temperature radiation for a long time. Tests have shown that the high-temperature probe can detect surface defects with a depth of 1.5 mm, a width of 0.3 mm and a length of 10 mm on the slab at 1100 ° C or higher. The technology can effectively suppress the noise influence caused by the vibration marks on the surface of the slab, and realize the positioning, quantitative analysis and printing record of the surface defects of the hot slab by means of computer signal processing technology, in order to realize the online non-destructive testing of the continuous casting blank. The technical basis.
According to the data, a Swedish company designed and manufactured a device capable of inspecting steel and other sheet metal and billet surface defects of around 1000 °C according to eddy current technology. The device guarantees that the two surfaces of the steel are scanned in almost all vertical directions. Using an analyzer consisting of computers, the input signals are divided into three main categories: severe defects, harmless defects, and unrecognized, and the location of any defects can be found. The device is capable of accurately measuring the position of a score of 0.5 mm deep on the surface of the blank.
Detection of Stainless Steel Capillary
For extremely small diameters such as stainless steel capillary offline or online non-destructive testing, the electromagnetic eddy current detection method is feasible, but special probes must be configured to achieve satisfactory results. Due to the extremely small diameter of the capillary tube, the current state of the art has not been able to make an internal probe, and it is impossible to use a point probe for detection. It can only be detected by an external through the probe. The differential external probe developed by Xi'an Jiaotong University and Edson (Xiamen) Electronics Co., Ltd. have the width and thickness of the coil, the span between the two coils, the gap between the probe and the capillary, and the wire diameter. After calculation and optimization, the special advanced external special probe is equipped. When the detection frequency is 666kHz, the stainless steel capillary of Φ1mm and Φ0.45mm is tested, and good results are obtained.
Wire Online Inspection
The wire-line inspection generally uses two methods: one is the rotary detection type, that is, the eddy current detector rotates around the wire at a high speed. This method is mainly used to detect cracks, scratches and wire scratches extending in the longitudinal direction of the wire. The trajectory of the detector is helical relative to the movement of the wire. Using multiple detectors in parallel for high-speed rotation, 100% inspection is possible, but the sensitivity of surface inspection is limited. It is not easy to maintain a constant spacing between the detector and the wire, and the sensitivity is reduced when the gap is increased. If the wire is eccentric, the gap changes. The high-speed processor automatically senses the gap and continuously compensates for the sensitivity of the system. The other is a surround coil type. The wire passes through the toroidal coil. The transducer effectively checks the distribution of the eddy current in a section and compares it with the previous section. It is suitable for detecting point defects and circumferential cracks. For transverse cracks, V-shaped cracks, inclusions, Pit and folding have high sensitivity. The detection speed is fast and the detection diameter range is large.
The wraparound coil drives current is higher than the rotary probing type and has better depth penetration. The system has good stability and is not affected by temperature changes and other factors. When the magnet material is below the Curie point of 800 ° C, the signal is suppressed after magnetic saturation, but the magnetic saturation can be prevented by adjusting the magnetic field strength to improve the sensitivity. At present, most of them use a surround coil type, and the above two methods can also be used in combination. Eddy current technology has been well applied in the production of wire drawing, oil tempering production lines, a cold-rolled steel wire or spring steel wire. The water-cooled surrounding coil detects the wire rod with a temperature exceeding 1100 ° C, and the detection speed exceeds 500 km / h.
Liquid Level Detection
Accurate detection of the crystallizer level is the key to automatic liquid level control during continuous casting production. The vortex molten steel level gauge has obvious advantages such as fast reaction speed, high measurement accuracy, no special safety protection, convenient installation and maintenance, and the application progress is very fast. Song Dongfei introduced the situation of Pangang's transformation of the domestically produced RAM series eddy current steel level controller. The measuring system uses an eddy current sensor to measure the molten steel level. The 50 kHz high-frequency signal generated by the oscillator is supplied to the primary coil (excitation coil) of the sensor. Due to the eddy current in the molten steel, the alternating magnetic field is generated by the primary coil. Height changes. A voltage VγV2 which is proportional to the intensity of the magnetic field passing through the coil is generated in the secondary coil (measuring coil) so that the differential voltage (V1-V2) varies with the liquid level. Through the amplification, phase, frequency, amplitude analysis and linearization of V1-V2, it is sent to the 16-bit high-performance single-chip 80C196KC for processing, which is obtained by measuring the liquid level height signal and converting it into 4~20mA signal by the controller to send it to the crystal. Liquid level control system PLC. The controller has a measuring range of 0 to 150 mm and a resolution of 0.1 mm. The operation shows that the performance of the liquid level control system is stable and reliable, and the use accuracy is up to ±3mm, which not only reduces the surface crack of the slab, improves the product quality, but also has significant economic benefits.
BKN is a professional ultrasonic flaw detector manufacturers, we provide ndt testing machine, ultrasonic flaw detector machine, ultrasonic pipe inspection equipment and etc. Want to know more? Please contact us.
#eddy #current #machine #for #sale
New Application of Eddy Current Nondestructive Testing Technology in Steel Industry
The preparation of corn germ oil generally includes the extraction of corn germ, the pretreatment, pressing and extraction of corn germ, and the refining of crude oil. The quality of production technology in each process will directly affect the yield and quality of products. There are many starch and seed coat impurities in maize germ degerminated by dry method. The starch impurities will greatly affect the oil yield of maize germ. In addition, starch in germ reduces oil flow area, blockages oil path, absorbs oil, reduces oil yield, gelatinizes and cokes in the process of steaming, pressing and desolving, which affects the quality of finished oil and meal. The wet germ obtained by wet separation is easy to promote lipase activation to decompose oil, resulting in oil rancidity, acid value height, dim color, poor oil quality, and increase refining loss.
Characteristics of corn oil press machine:
1. High oil production rate - compared with the old equipment, the normal oil production rate of corn press can be 2 to 3 percentage points higher. An average of 2-6 kg more peanuts are processed per 100 kg of peanuts. The annual economic benefit is considerable.
2. Energy-saving - 40% reduction of electric power with the same output, calculated by saving 6 kilowatt-hour on average, can save 30 yuan of electricity fee per day in production.
3. Save labor - Save 60% of the labor force with the same output, and organize production with one to two people, saving about 40 yuan per day.
4. Wide use - multi-purpose machine, can squeeze peanut, flax, sesame, rapeseed, sunflower, cottonseed, soybean and more than 30 kinds of oil crops. Multistage pressing, one time pressing net.
5. Oil purity - vacuum filtration residue, to ensure the purity of oil, in line with health and quarantine standards.
6. Small area - oil workshop needs 10-20 square meters to meet the use.
It is novel in conception, mechanical and electrical integration, scientific in design, reasonable in structure, simple in operation, safe and stable. It takes only a few minutes to complete the whole process from feeding to finished products with automatic device.
#corn #oil #press #machine